63
EN
GLIS
H
¢
INSTALLATION AND CONNECTION
¢
Mobile installation
To install the transceiver, select a safe, convenient location inside your vehicle that
minimizes danger to your passengers and yourself while the vehicle is in motion. Consider
installing the unit at an appropriate position so that knees or legs will not strike it during
sudden braking of your vehicle. Try to pick a well ventilated location that is shielded from direct
sunlight.
1.
Install the mounting bracket in the vehicle using the supplied self-tapping screws (4pcs),
flat washers (4pcs), and spring washers (4pcs).
• The bracket must be installed so that the 3 screw hole positions on the side of the
mounting bracket are towards the rear of the bracket.
2.
Position the transceiver, and insert and tighten the supplied hexagon SEMS screws
and flat washers.
• Double check that all hardware is tightened to prevent vehicle vibration from loosening the
bracket or transceiver.
Self-tapping screw (5mmX16mm)
Spring washer
Flat washer
• Determine the appropriate angle of the transceiver, using the 3
screw hole positions on the side of the mounting bracket.
Содержание Transport 160
