18
2.4.4 Setting the time
•
Press
for 5 seconds to set the time.
The hours flash to show that they can now be changed.
•
Set the hours using the
or
keys.
•
Press
to confirm the hours setting.
Once the hours have been confirmed, the minutes begin to flash.
•
Set the minutes using the
or
keys.
•
Press
to confirm the minutes setting.
2.4.5 Programming "TIMER"
Up to three different "TIMERS" can be set for the PM40 heat pump.
Setting "TIMER" 1, 2 or 3:
•
Press
to set "TIMER 1".
The hours start to flash with the indicator (to set the start time)
.
•
Set the hours using the
or
keys.
•
Press
to confirm the hours setting.
Once the hours have been confirmed, the minutes begin to flash.
•
Set the minutes using the
or
keys.
•
Press
to confirm the start time setting and proceed to setting the stop time ( indicator lit).
•
Repeat the same steps as above to set the stop time ( indicator lit) for the "TIMER".
•
Press
to confirm the settings for "TIMER 1".
•
Press
then
, the
symbols start to flash.
•
Press
to set "TIMER 2" or "TIMER 3".
•
Follow the same steps for setting "TIMER 1" in order to set "TIMER 2" and/or "TIMER 3".
Disabling "TIMER" 1, 2 or 3:
•
Previously select the TIMER to be disabled using the
key then
to select "TIMER" 1, 2 or 3.
•
To disable the "TIMER", set the start time and stop time for the "TIMER" to the same time by following the
steps indicated in the paragraphs for setting the "TIMER".
Содержание PM40 Series
Страница 2: ......
