Zodiac eXO iQ Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 60

Zodiac eXO iQ Series Скачать руководство пользователя страница 32

30

5.2.3 Setti ng the ti me

The ti me must be set for the "TIMERS" fi ltering programmes and for the "SWC" chlorinati on programmes to work.

The ti me is set when fi rst using the appliance. If the ti me must be changed at a later moment, follow the instructi ons

below:

•

To change the ti me, press

and browse using the

butt ons.

•

Confi rm the selecti on by pressing

.

• Press

to exit.

5.2.4 Selecti ng the fi lter pump

The fi lter pump can be directly connected to and managed by the appliance.

•

To achieve this, the fi lter pump must have already been connected to the power supply, see

“2.5.2

Identi fying the functi ons to be connected”.

•

To declare the presence of the fi lter pump, press

. Browse the menu using the

butt ons.

Press

to confi rm.

•

Select the type of fi lter pump and confi rm that the connecti on has been made properly:

•

Conti nue confi gurati on by programming the "TIMERS" fi ltrati on ti mes, see

“5.2.5 Programming the

“TIMERS” fi ltrati on ti mes”

.

«
...
30
31
32
33
34
...
»

Содержание eXO iQ Series





























































Отзывы:

Нет отзывов