background image

1

 WARNINGS

GENERAL WARNINGS

•  Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

•  The appliance is intended for use in swimming pools only and must not be used in application other than that for which it is designed.

•  It is important that the equipment is operated by competent and qualified persons (both physically and mentally) who have previously received instructions for its 

use. Any person not meeting these criteria should not approach the appliance, in order to avoid exposure to dangerous parts.

•  Keep children away from the equipment.

•  The appliance must be installed in accordance with the manufacturer’s instructions and respecting current local standards. The installer is responsible for installing 

the equipment and for compliance with national installation regulations. Under no circumstances can the manufacturer be held liable in the event of failure to 

comply with applicable local standards.

•  For other than the simple user-maintenance described in this manual, the product must be serviced by a qualified professional.

•  Incorrect installation and/or use may cause serious damage to property or serious injuries (possibly resulting in death). 

•  Any equipment, even carriage and packing paid, travels at the consignee's risk. The consignee should enter any reservations in writing on the carrier’s delivery 

note, if there is any evidence of transport damage (and confirm them by recorded delivery letter to the carrier within 48 hours). In the event of a device containing 

coolant fluid that has been tipped over, issue your reservations to the carrier in writing.

•  If the appliance suffers a malfunction, do not try to repair it yourself; contact a qualified technician.

•  If the mains supply cable is damaged, it should be replaced by the manufacturer, its maintenance agent or other qualified risk, to prevent any risk.
•  Refer to the warranty conditions for details of the permitted water balance values for operating the appliance.

•  Defeating, eliminating or shunting any of the safety that may be a part of the device automatically voids the warranty, as does the use of unauthorized, third party 

replacement parts.

•  Do not spray insecticide or any other chemical (inflammable or non-inflammable) in the direction of the appliance, as this could damage the body and cause a fire.

•  Zodiac® Heat pump, filtration pump and filter appliances are compatible with most commonly used pool water treatment systems.

•  For heat pump appliances or dehumidifiers, do not touch the fan or insert a rod or your fingers through the grating when the appliance is in operation. The fan 

rotates at high speed and may cause injuries or even death.

WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES

•  The electrical supply to the appliance must be protected by a dedicated 30 mA residual current protection device, complying with the standards and regulations 

in force in the country where it is installed.

•  Before carrying out any operations, check that:

•  The voltage indicated on the appliance's information plate corresponds to the mains voltage, 

•  The power grid is adapted to the power requirements of the appliance, and is grounded. 

•  The plug (where applicable) is suitable for the socket.

•  In the event of abnormal operation or odours being released from the appliance, turn it of immediately, unplug it from its power supply and contact a professional.

•  Before doing any work on the appliance, ensure that it, and any other equipment connected to the appliance, is switched off and disconnected from the power 

supply and that the heating priority (where applicable) is deactivated.

•  Do not disconnect and reconnect the appliance to the power supply when in operation.

•  Do not pull on the power cord to disconnect it from the power supply.

•  Do not handle electrical parts with wet hands.

•  Clean the terminal block or power supply socket before connection.

•  For any component or sub-assembly containing a battery: do not recharge or dismantle the battery or throw it into a fire. Do not expose it to high temperatures 

or direct sunlight.

•  In stormy weather, unplug the appliance to prevent it from suffering lightning damage.

•  Do not immerse the appliance in water (with the exception of cleaners) or mud.

SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"

•  The cleaner must operate in pool water with a temperature of between 15°C and 35°C.

•  To avoid possible injury and damage to the cleaner, do not operate the cleaner out of the water.

•  In order to prevent possible injury, bathing is prohibited when your cleaner is in the pool.

•  Do not use the cleaner during shock chlorination.

•  Do not leave the cleaner unattended for an extended period.

WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE: 

•  Before installing your new cleaner, carefully inspect the lining of your pool. If the liner has eroded in some areas, or if you notice gravel, folds, roots or corrosion 

caused by metal on the inner surface of the liner, or if you notice that the support (bottom and walls) is damaged, do not install the cleaner before performing the 

necessary repairs or before replacing the liner using a qualified professional. The manufacturer cannot be held liable in any way for damage caused to the liner.

•  The surface of certain vinyl patterned surfaces can wear rapidly and the patterns disappear on contact from objects such as cleaning brushes, toys, inflatable buoys, 

chlorine distributors and automatic pool cleaners. The decoration on some vinyl surfaces can be scratched or worn by basic friction such as through the use of a 

pool brush. The colours of certain patterns can also be erased during use or when in contact with objects in the pool. The erased patterns, wear or scratching of 

vinyl surfaces are not the liability of the manufacturer and are not covered by the limited warranty.

Recycling

 This symbol means that your appliance should not be disposed of with other rubbish. It will be selectively collected for the purpose of reuse, 

recycling or transformation. If it contains any substances that may be harmful to the environment, these will be eliminated or neutralised.

 Contact your retailer for recycling information.

Содержание Diag box













Отзывы: