3
1. Package content
Check that your appliance has not been damaged during transport (shocks, broken parts, etc.). If you find any problems do
not hesitate to contact
Z
odiac® before using the product.
Diag Box
(x1)
Adaptor organiser (x1)
Adaptors (x6)
2. Diag Box operating principle (Quick Test and Full Test)
The Diag Box is a tool which has been specially designed to help professionals detect faults on Zodiac® electric robots.
Depending on your needs (and the appliance to be inspected), you may carry out 2 types of test:
- Quick Test:
This is a "simplified" test using the Diag Box tool only (may be carried out in the field, for example).
This mode lets you launch automatic verification cycles and view a certain number of steps and any error codes directly
on the Diag Box;
During the test, do not touch the robot or press the keys on the robot control unit.
- Full Test:
This "enhanced" mode lets you view or export more detailed information (number of hours' operation, error
history, etc.).
To use this mode, simply connect the Diag Box to a computer (via the USB cable included) and use an additional free
software package (Full Test Software, which may be downloaded from the Zodiac website: $.8).
3. Electrical connection
- To connect the adaptor, follow the configuration below: End with coloured ring on the Diag Box side
.
-
Connect the USB cable from the Diag Box to the computer to use Full Test mode only, otherwise the Quick
Test functions will no longer be accessible.
- Mains connection.
-
dia6
message displayed.
1
Computer connection
(for Full Test mode only), §.8
3
- Robot
- Control box
- Motor unit
2
3.1 Specific connection for Lazernaut, Cybernaut™ NT (>2010)
Image 1. Open the robot's control box
Image 2. Connect the yellow adaptor between the Diag
Box and the robot's control box
