9
7. Remote control Test : depending on the Vortex™ model
Switch on the remote control and press and hold (8 seconds): OK + CANCEL
6ood
Fail
Turn the remote control to test the reception
Check the consistency between the orientation and the message which
is displayed
Carry out the peering oper
-
ation at least once
If the
Fail
message is dis
-
played again, replace the
remote control
To the FRONT
To the REAR
To the RIGHT
To the LEFT
STOP position -
Horizontal
Out of range
fd
bd
lft
rgt
STOP
L0st
Replace
the batteries
LOW
To exit the peering operation, press: OK
or
CANCEL
or
START-STOP
8. Full Test: enhanced mode (with Full Test Software application)
8.1 Downloading Full Test Software
Before you use the tool for the first time, download the
Full test Software
application from:
www.zodiac-poolcare.com
• Access your
Professional area
• Open the
Care Center
section, the
download Full Test Software
8.2 Start-up
- Robot
- Control box
- Motor unit
2
Computer connection
==> The
USb
message replaces the
dia6
message
(the Quick Test functions are no longer accessi
-
ble)
3
- Mains connection.
- The
dia6
message is dis
-
played.
1
Full Test Software
application launched
4
8.3 Meaning of the lights (Full Test mode)
Lights on
Meaning of the lights
Not used
The USB cable is connected
Data being transferred between the Diag Box and the computer
Malfunction detected, check the Diag Box display
