![background image](http://html1.mh-extra.com/html/zodiac/cyclonx-oc-3300-tile/cyclonx-oc-3300-tile_installation-and-user-manual_4037689013.webp)
11
3.5.4 Surface control
•
Check that the cleaner filter is clean so as not to affect the cleaner's behaviour.
•
Once the cleaning cycle has been launched, monitor the cleaner's behaviour when climbing the walls and when it
brushes the water line.
• You can use the
(Surface Control System) button at any time depending on the cleaner's behaviour:
refer to the
table below.
•
The new configuration will be effective the next time the cleaner climbs the walls.
•
2 LEDs are lit by default
.
Cleaner behaviour to be observed
Action
The cleaner quickly climbs the walls and goes past the
water line, aspirating air:
Reduce the number of LEDs.
Press:
The cleaner slowly climbs the walls and stops below the
water line:
Increase the number of LEDs.
Tip: Optimise wall cleaning and water line brushing operations
According to the type of pool lining, the cleaner will behave differently when climbing the walls. The cleaner
has the
function to optimise
wall cleaning, then water line brushing
on all types of lining.
However the
function is set, the suction power remains at its maximum at all times when the cleaner
is moving across the bottom of the pool.
EN
Содержание CyclonX OC 3300 TILE
Страница 2: ......