![background image](http://html1.mh-extra.com/html/zodiac/cyclonx-oc-3300-tile/cyclonx-oc-3300-tile_installation-and-user-manual_4037689017.webp)
15
4.4 I Replacing the brushes
•
Each brush is equipped with wear indicators; the distance between the indicators and the end of the brush indicates
whether the brush is in good condition (see figure )
.
•
The brushes are worn and should be replaced when the wear indicators appear as shown in figure
.
•
To remove worn brushes, remove the tabs from the holes in which they are fixed (see figure )
.
•
To fit new brushes, start by fitting the side without tabs under the brush holder (see figure )
.
•
Roll the brush around its support, slide the tabs into the attachment holes
and pull on the end of each tab
until its
edge passes through the slit (see figure )
.
•
Cut the tabs using a pair of scissors for them to be level with the other blades (see figure )
.
EN
Содержание CyclonX OC 3300 TILE
Страница 2: ......