background image

Robotic Pool Cleaner BASIC 2 

 |  Operating Instructions

1

 Contents

1. INTRODUCTION .............................................................................2

2. SPECIFICATIONS ............................................................................2

3. WARNINGS AND CAUTIONS ........................................................2

 

3.1. Warnings ................................................................................2

 

3.2. Cautions .................................................................................2

4. POOL CLEANER PARTS ..................................................................3

5. USING THE POOL CLEANER .........................................................4

 

5.1. Setup ......................................................................................4

 

5.2.  Putting the Pool Cleaner into the pool ...............................4

 

5.3.  Removing the Pool Cleaner from the pool .........................5

 

5.4. Maintenance ..........................................................................6

 

        5.4.1. Cleaning the filtration system.....................................6

 

        5.4.2. Cleaning the impeller..................................................8

 

5.5.  Off-season storage ...............................................................9

6. STAND ASSEMBLY.........................................................................55

Robotic Pool Cleaner BASIC 2

Operating Instructions

Summary of Contents for BASIC 2










Reviews: