Zmorph FAB, Быстрый старт

Страница: 12 / 48

Zmorph Fab - QUICK START GUIDE 12
Setting up Zmorph Fab
Take out the filament roll from the plastic
bag and slide it on the bar. Put the bar with
filament on the holders.
6.3 Assembling the spool holder
For a better experience with the Zmorph Fab machine, it is recommended to assemble the dedicated spool holder.
Prepare the spool holder
components and a 2.5 mm
Allen key. Look at the back of Zmorph
Fab. Spool holder attachment
screws are placed at the top
of the frame and highlighted
on the picture. Loosen the frame screws with
a 2.5 mm Allen key.
Loosen the screws to the
point where you can slide the
spool holder. Slide the spool holder in
place. Tighten the screws.