Zmorph FAB, Быстрый старт

Страница: 25 / 48

zmorph3d.com 25
9.3 First Print
After uploading the file to an internal card or inserting a SD card with the file:
Choose ‘NEW JOB’. Choose ‘CHOOSE FILE’. Files uploaded to the internal
card are located in the
‘INTERNAL’ tab, files uploaded
to the SD card are located in
the ‘EXTERNAL’ tab.
Select the previously prepared
G-code file. To open a folder,
select its name. Exiting the folder is done
by selecting the folder icon. After selecting the file
choose ‘NEXT’.
NEW JOB MAINTENANCE
CANCEL NEXT
EXTERNAL INTERNAL
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START BACK
CANCEL NEXT
EXTERNAL INTERNAL
CANCEL NEXT
EXTERNAL INTERNAL
CANCEL NEXT
EXTERNAL INTERNAL
example.gcode
example.gcode example.gcode example.gcode
NOTE
If the selected G-code file has temperature presets after pressing the ‘NEXT’ button the machine
will automatically start preheating.
The table can be prepared by
selecting ‘MOVE BED’. Apply
an adhesive solution to the
table surface. Choose ‘START’. Printing will start automatically
when the extruder and the
table have reached the right
temperature.
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START BACK
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START BACK
PAUSE ABORT SETTINGS
example.gcode
progress 20% 0h34m elapsed
Dual Extruder Toolhead