Zmorph FAB, Быстрый старт

Страница: 17 / 48

zmorph3d.com 17
If your filament is not loaded,
feed it using ‘bottom arrow ’
on the screen. If your filament
is already loaded choose
‘NEXT’. Wait for the machine to finish
printing the pattern.
Look at the printed lines
and select the best one on
the screen. A correct line is
the one that sticks to the
table after gently touching
it with the finger, but can
be easily ripped off with a
fingernail. Apply your choice by pressing
the ‘NEXT’ button. Zmorph Fab calibration is
complete.
LOAD FILAMENT
NEXT BACK
NONE, REPEAT PRINTING
1 2 3 4 5
NEXT
Choose the best printed line
(numeration from left to right)
Calibration complete!
DONE
Each one of those lines is printed on a slightly different height (+/- 0.05 mm) with the middle line
being the result of the automatic calibration process.
NOTE
Clean the bed. Your machine
is ready for your first print!
If none of the printed lines is proper, please follow steps on the
next page.
NOTE
Single Extruder Toolhead 1.75mm
80mm