Zmorph FAB, Быстрый старт

Страница: 21 / 48

zmorph3d.com 21
Insert the filament into the
left side guide hole on top of
the extruder. Tap the ‘LOAD/UNLOAD’
menu. Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow
with ‘LEFT’ description to do that.
Push the filament down
until you feel it has been
grabbed by the extruder
drive gear. Insert the second filament
into the right side guide
hole on top of the extruder. Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow
with ‘RIGHT’ description to do
that.
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
PARK
TOOL
BACK
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
PARK
TOOL
BACK
Third menu named ‘ALL’ maintaines both filaments at the same time. Tap down arrow with ‘ALL’
description to feed both filaments.
By tapping the button showing ‘80 mm’ you can change the amount of extruded filament to 15 mm
or 5 mm.
Push the filament down
until you feel it has been
grabbed by the extruder
drive gear. Wait until the material flows
out of the nozzle. Tap the feed
button again if necessary.
NOTE
Dual Extruder Toolhead
80mm
80mm
80mm
80mm
80mm
80mm