Zmorph 2.0 S, Руководство пользователя

Страница: 40 / 83

SOFTWARE / VOXELIZER
40
Before starting print it is important to prepare printer.
There are four most important parameters, you shouldn’t forget:
Head homing (resetting coordinate system)
Heating extruder
(235-245°C for ABS plastic/ 185-200°C for PLA)
Heating bed (100°C for ABS plastic/ 60°C for PLA)
Beds sticky surface (can be covered with ABS juice, special glue, kapton or paper
masking tape, or other special surfaces like Build Tak )
Click "PRINT" to begin your print. Instructions will be sent to printer during
printing so you shouldn't unplug your printer from computer.
A
Then use one of three printing methods: