11
6
E
INSTALLATION INSTRUCTIONS
IMPORTANT: This appliance shall be installed only by authorized
persons and in accordance with the manufacturer’s installation
instructions, local gas fitting regulations, municipal building codes,
electrical wiring regulations, local water supply regulations.
STEP 1 - UNPACK THE OVEN
WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1
Using two or more people, remove the oven and set it on cardboard
to avoid floor damage.
NOTE: Do not use the handle or any portion of the front frame
for lifting.
2
Remove the shipping materials and tape from the oven.
3
Remove the hardware package from inside the bag containing
literature.
4
Remove and set aside racks and other parts from inside the oven.
5
Move the oven on the cardboard near where it will be installed.
STEP 2 - REMOVE THE OVEN DOOR
IMPORTANT: The oven door is heavy and fragile, and the door
front is glass. To avoid oven door glass breakage, use both hands,
and grasp only the sides of the oven door to remove.
1
Open the oven door.
2
Locate the door latches in both corners of the oven door, and rotate
the latches forward to the unlocked position.
Locked
Unlocked
3
Grasp the edges of the oven door with both hands and push the
oven door fully closed. Lift up and pull oven door toward you to
remove. Set the oven door(s) aside on a covered work surface.
STEP 3 - INSTALL OVEN
WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1
Using two or more people, grasp the ceiling of the oven cavity and
lift the oven onto a table or platform even with the cutout opening.
NOTE: The surface must be able to support the following weight:
• Single Oven: 160 lb (73 kg)
• Double Oven: 290 lb (132 kg)
2
Feed the flexible electrical supply conduit from the oven to the
junction box.
STEP 3 - INSTALL OVEN
1. Using two or more people, grasp the ceiling of the oven cavity and lift the oven onto
a table or platform even with the cutout opening.
NOTE
: The surface must be able to
support 160 lb (73 kg).
2. Feed the flexible electrical supply conduit from the oven to the junction box.
STEP 4 - MAKE ELECTRICAL CONNECTION
To properly install your oven, you must determine the type of electrical
connection you will be using and follow the instructions provided for it here.
DIRECT WIRE
• Disconnect power before servicing.
• Improper connection of aluminum house wiring and copper appliance leads can
result in an electrical hazard or re. If the home has aluminum wiring, only use
connectors designed and UL listed for joining copper to aluminum and precisely
follow the manufacturer’s recommended procedure. Aluminum-to- Copper
connections must conform with local codes.
• Use 8 gauge copper or aluminum wire.
• Electrically ground oven.
• Failure to do so can result in death or electrical shock.
• Be sure your appliance is properly installed and grounded by a qualified technician.
Ask your dealer to recommend a qualified technician or an authorized repair
service.
Installation Requirements
WARNING
ELECTRICAL SHOCK HAZARD
WARNING
Содержание ATTAINABLE LUXURY AWD-30
Страница 1: ...Double Wall Oven Installation Guide and Users Manual ...
Страница 2: ......
