Swing Gate Opener
User Manual
P a g e
| 27
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Condominium function. (With
Automatic closing function)
When the door is opening, it can’t be
stopped.
Open Button: port 3/Close Button:
port 4
Open Button: port 3/Close Button: port 4
(With Automatic closing function.)
Learning/
removing
transmitters
code
Learn a remote on channel1. Both
motor control
Learn a remote on channel2. Single
motor control (motor2)
Delete all remotes in memory.
Same as 5.6,
To delete just one code, select
and push the learned
remote button removed, on
the display is show
“OK”
for a
while if the operation is done.
To delete all codes, select
and push enter, then
confirm with.
Learning
traveling
Automatic learning procedure. Same as 5.4
Manual learning procedure.
Attention: before starting
learning procedure, the gate
must be opened to do the
automatic procedure,
otherwise must be closed to
do the manual procedure. Use
the “dead man” function to put
the gate in the right position.
Is it possible to program
working time automatically,
please refer to “Quick
installation”
Automatic
procedure for
working times
to
seconds
The wings close Automatically, in the
meanwhile all the working times and values
for obstacle detection sensors are learned. If
just motor 2 is connected, the control unit
10 seconds
Attention: in this procedure all
safety inputs are disabled.
