Swing Gate Opener
User Manual
P a g e
| 24
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Inputs Status
When the control unit is on standby. Users can read inputs status on display:
:
Initial Display No input active.
:
Stop input active.
:
Photo stop input active.
:
Photocells input active.
:
Start input active.
:
Pedestrian input active.
:
Open input active.
:
close input active.
During the pause, the display shows the seconds countdown to closing.
Travel Setting (VERY IMPORTANT)
After the first-time installation but before starting the normal operation, one important step that
you must take is to set the opening and closing limit stop positions for the running travel.
Please unlock the actuator first, manually swing the 2 doors to the fully opened position then lock
the actuator. At the Initial display
, Press and hold ‘TS1’ button on the PC board till you read on
the display. The door will open and stop in the opened position for 5 seconds (the PC board is
