ZKTeco InBio160, Руководство пользователя

Страница: 5 / 46

1
1 Safety Instructions
Important Security Instructions 1.1
1. Read and follow the instructions carefully before operation. Please keep the instructions for
future reference.
2. Accessories: Please use the accessories recommended by the manufacturer or delivered with
the product. Other accessories are not recommended, including major alarming systems and
monitoring systems. The primary alarming and monitoring system should comply with the
local applicable fire-prevention and security standards.
3. Installation cautions: Do not place this equipment on an unstable table, tripod mount, support,
or base, lest the equipment falls and get damaged or any other undesirable outcome resulting
in severe personal injuries. Therefore, it is essential to install the equipment as instructed by
the manufacturer.
4. All peripheral devices must be grounded.
5. No external connection wires can be exposed. All the connections and idle wire ends must be
wrapped with insulating tapes to prevent any damage to the equipment by accidental contact
of the exposed wires.
6. Repair: Do not attempt to have an unauthorized repair of the equipment. Disassembly or
detachment is risky and likely to cause shock. All repairs should be done by a qualified
technician.
7. If any of the following cases arise, disconnect the power supply from the equipment first and
intimate the technician immediately.

The power cord or connector is damaged.

Any liquid or material spilled into the equipment.

The equipment is wet or exposed to bad weather (rain, snow, etc.).

If the equipment cannot work properly, even if it is operated as instructed, please be sure to
adjust only the control components specified in the operating instructions. Incorrect
adjustments on other control components may cause damage to the equipment; even the
equipment may fail to operate permanently.

The equipment falls, or its performance changes dramatically.
8. Replacing components: If it is necessary to replace a component, only the authorized
technician can replace the accessories specified by the manufacturer.
9. Security inspection: After the equipment is repaired, the technician must conduct security
inspection to ensure proper working of the equipment.