6 C5S110&120&140
User Manual
3
Installation and Connection
3.1
Chassis Installation
The following describes the chassis installation process:
If the provided chassis is used, the control panel has been installed inside the chassis by default. Fix the chassis on
the wall, remove the hole plug or get through the thread hole, connect the access control cable, and install other
components.
Remarks:
The control panel has a guide rail on the back. If you need to install the control panel separately
without the chassis, you can use the guide rail to fix the control panel. The following figures show how to fix the
control panel using the guide rail.
The following shows the chassis appearance and internal structure:
Panel Box Appearance Panel Box Inside Get the Panel off the track
(Remove the set screws)
Control Panel
Temper Switch
Power Adapter
Guide Rail
Control Panel
1) Remove the hole plug or
get through the thread hole
2) Fix the guide rail on the
wall
3) Install other components
Box Lock Hole
State Indicator
Antenna
Connector
Thread
Hole
Heat Dissipation
Hole
Power
Interface
Thread Hole
