22 C5S110&120&140
User Manual
5)
Select available WiFi in the wireless network list and click [Action] (Figure 1), enter the key, and configure DHCP
(the IP address and gateway must be in the same network segment as the wireless network IP address), and
then click [Confirm]. After the connection is successful, the wireless connection status shows connected
(as shown in Figure 2), and the device's WLAN indicator turns green.
figure 1 figure 2
Note:
The PC (server) must be on the same network segment as the router (wireless network).
6)
Switch network connection in the software.
For ZKAccess3.5 software
: Select the added C5S control panel on the Device page and click [More…] > [Set
up WiFi], as figure 3, set the WIFI parameters of the control panel based on the router parameters. Restart the
control panel to make the WIFI settings take effect.
figure 3
