L9000 Fingerprint Lock User Manual
2.1.1 Enroll a Fingerprint
Note: 1-3 steps are same as above. Here is no
longer to restatement.
4.
Choose
Enroll FP
on the
Enroll Admin
interface. As shown in figure 1 on the left. Press
OK
key to display
Admin Accredit
interface, as
shown in figure 2 on the left.
5
. Press
S
/
T
key to select the type of admin
accredit, can select as
Supervisor
or
Admin
. Press
OK
key to confirmation; or press
ESC
key to exit,
and return to the
Enroll Admin
interface.
6
. Choose the type of admin accredit as Supervisor.
Press
OK
key to display
New Enroll
interface, as
shown in figure 3 on the left. The default User ID is
00001 that is the first User ID. You also can press
S
/
T
key to select the unused User ID; press
ESC
key can give up operation, and then return to the
Enroll Admin
interface.
7.
Press
OK
key to start enroll. According to the
interface prompts "Place Finger", "Remove Finger",
"Second Press", "Remove Finger", "Third Press", "Remove Finger", and press the
same finger on the
Fingerprint Collector
three consecutive times by adopting the
proper finger placement mode. As shown in figure 4 on the left.
Note
: The last digit in "00001-0" refers to the fingerprint count. "0" refers to
the first fingerprint, "1" refers to the second fingerprint and so on and so forth.
Reserve the rights of modification and explanation
15