ZIVE LAB ZIVE SP2, Руководство по оборудованию

Страница: 32 / 46

ZIVE SP2 Instruction manual
- 32 -
Electrometer
Max input voltage ±10V
Input impedance 2x10 13 Ω||4.5pF
Bandwidth >22MHz
CMRR >114dB
EIS(Internal FRA) for system
Frequency range 10uHz ~ 2MHz
Frequency accuracy 0.01%
Frequency resolution 5000/decade
Amplitude 0.1mV ~ 5V rms (Potentiostatic)
0.1 ~ 70%(Galvanostatic)
Mode Static EIS:
Potentiostatic, galvanostatic, pseudo-galvanostatic, OCP
Dynamic EIS:
Potentiodynamic, Galvanodynamic
Fixed frequency Impedance:
Potentiostatic, Galvanostatic, potentiodynamic, galvanodynamic
Multisine EIS:
Potentiostatic, Galvanostatic
Intermittent PEIS/GEIS
Interfaces for system
Auxiliary port
Digital output 3 (open collector)
Digital input 2 (photo coupler)
Auxiliary voltage inputs 3 analog Inputs: ±10V
For measurement of WE vs. CE
CE vs. RE or other signal
Analog output 1 analog output: ±10V
For stirrer, MFC, RDE etc.
Misc. port
Sig generator output 1 analog output for FRA output or
waveform generation output
Peripheral communication I2C to control external devices
Temperature measurement 1 K-type thermocouple input
Zero Resistance Ammeter 2nA ~ 2A
Software
Max steps per experiment 1000
Shutdown safety limits Voltage, current, temperature etc
Max. sampling rate 20kHz(50usec)-burst mode
500kHz(2usec) in fast sweep mode
Min. sampling time unlimited
Sampling condition Time, dv/dt, dI/dt, temp etc.
PC requirement
Operating system WindowsXP/2000/Vista/7/8 (32bit/64bit)
PC specification(minimum) Pentium4, RAM 1GB
Display 1600x900 high color
USB High speed 2.0
General
Dummy cell One external dummy cell included
Thermocouple 1.5meter K-type (option)
Auxiliary cable Option
Misc. cable Option
Specifications & software subject to change without notice. ZIVELAB
Windows is a registered trade mark of Microsoft Corporation
.