ZIVE LAB ZIVE SP2, Руководство по оборудованию

Страница: 22 / 46

ZIVE SP2 Instruction manual
- 22 -

If you input wrong license code, you can see the following message

You MUST click “Save channel info”.

After above process, you MUST turn off ZIVE SP and turn it on.

License code comes from ZIVE SP serial number. So if you try to input license code for other ZIVE
SP, it will be invalid.

If you configure the system as multichannel, each channel has its own license code, you need to
change license code per channel.

Click the row for device number then background color will be changed to yellow. Then you can
change the license code for each device(channel) as the above process.
B. Channel Expansion
Note: From serial number R**********S , You must move interface board ROM write protection switch
direction to write enable direction inside of instrument
In order to configure multichannel system using multiple SP series;
If you buy additional channels later, you must input channel information(Device number and channel
assignment as the above and click “Save Ch. Setting”.
The following process is needed to configure multichannel system.
1. Connect multiple SP systems to usb port (If your PC’s usb port number is insufficient, you can use usb
hub)
2. Power on each SP
3. Run sm6.exe