Zippie VOYAGE, Быстрое руководство

Страница: 6 / 36

6
Attach/detach seat
Attach:
1. Lock the wheels, line up the yellow arrow with the
cross tube on the Voyage base.
2. Mate the bottom of the seat with the “Slide-n-
Lock” plate. Push towards rear of base until the
seat locks into place.
Detach:
3. Pull the release handle under the front of the seat,
pull forward and lift off.
Rotate the seat
1. Lock the wheels, remove the seat.
2. Push the gold button on the Slide-n-Lock plate
(pictured left) to release, and rotate a quarter turn
with the opposite hand.
3. Pull the pin and finish rotating the plate 180° from
the starting position.
4. Make sure the plate is locked in the new position.
Tilt/recline
1. Lock the wheels, remove the locking pin.
2. Lift up and hold the appropriate lever and move
the seat to the preferred position with the other
hand.
3. Release the lever and re-insert the locking pin to
lock the seat position into place.
Recline
Tilt
USING YOUR ZIPPIE VOYAGE