MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
35
ZI-MD500HST
14.3
Engine
Information about engine maintenance you can find in operation manual of the engine manufacturer!
14.3.1
Engine oil exchange
The engine oil change would be explicitly mentioned here in order to be included in the machine
operating manual. Oil change interval after the first 20h or 1 month after commissioning and then
every 100h or 1x per year.
N O T I C E
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
1.
Remove the oil drain plug (1) from the engine.
2.
Open the oil tank cap (2). Collect the draining oil in a
collection container and dispose of it properly.
3.
Retighten the oil drain plug after draining.
4.
Fill in fresh oil through the filling opening (3) (see
section Checking the engine oil level).
5.
Use only high quality engine oil, e.g: SAE30, 15W40 or
similar!
N O T I C E
Drain the used oil when the engine is warm.
Warm oil drains quickly and completely.
14.3.1
Check hydraulic oil
N O T I C E
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
1.
Unscrew the locking nut (1) to drain the oil into a pan.
2.
After the hydraulic oil system has been completely
emptied, retighten the lock nut (1).
