MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
34
ZI-MD500HST
14
MAINTENANCE
A T T E N T I O N
No cleaning, upkeep, checks or maintenance when machine is running
Shut off the machine and let it cool down before start servicing!
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
N O T I C E
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
14.1
Maintenance plan
Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Regularly prior to each operation
Damage of any part of the machine
Regularly prior to each operation
Fuel tank of tightness
Regularly prior to each operation
Track checking
Regularly prior to each operation
Machine cleaning
Regularly after operation
Lubricate the moving parts
Every 25 working hours
Cleaning spark plug
Every 25 working hours
Cleaning air filter
Every 20-30 working hours
Oil level checking
Every 50 working hours
14.2
Cleaning
Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
N O T I C E
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the machine!
Therefore: When cleaning, use only mild detergent
The use of high pressure cleaners is not recommended. It shortens the service life and reduces the
operational integrity. (Water can get into the gear!)
Impregnate bare surfaces of the machine against corrosion (e.g., anti-rust WD40)
