ZIPPER MASCHINEN ZI-MD500HSN, Руководство пользователя

Страница: 38 / 56

OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  38
ZI-MD500HSN
N O T I C E
 The steering characteristics change proportional to the speed driven and
the laden weight. The lightly loaded machine can be steered with lighter
lever operation. With greater loading of the steering lever to control with
higher pressure.
 The highest loadings of mini handling is according to the floor on which the
machine is used to adjust.
 It is therefore recommended to drive on difficult tracks in a low gear and
with caution. In such situations, the machine to be driven over the entire
range in a low gear.
 Avoid sharp turns and frequent changes of direction when driving on the
road, especially on rough, tough terrain, which has many sharp, uneven
areas, causing high friction.
 If the engine slows down under heavy load or the mini track dumper starts
to slip, select a lower gear.
ATTENTION: Gearbox is not synchronized. Change gears only while the
machine is standing still.
 Although the machine has a chain drive, please remember, to be careful
when working under adverse weather conditions (ice, rain and snow) or on
soils where the mini-dumper could be unstable.
 When the clutch lever is released, the machine is automatically braked and
stops.
 If the machine is stopped on steep slopes, one of the wheels must be
secured with a wedge.
1. Selecting the desired gear
When the motor has warmed up, engage the desired gear
(forward/reverse) with the gear selection lever. If the
desired gear cannot be engaged, briefly press the clutch
lever and repeat the procedure. After engaging the gear
selection lever, press the clutch lever and the mini dumper
starts moving.
Use the throttle lever to adjust the speed / power so that
it is adapted to the respective activity.
2. Steering the machine
The steering levers on the handles make steering easy.
Use either the left (1) or right (2) steering lever to move
in the desired direction.
13.3.3 Idle speed
Move the throttle lever to its lower position to protect the motor when not carrying out any
operation. Downshifting the motor to idle prolongs the life span, reduces fuel consumption and
the noise level of the machine.