12
Driver Body Bearing Removal
Use your fingers to remove the Inside Diameter (ID) spacer.
Insert the 17 mm Slide Hammer Bearing Puller slotted attachment
through the inboard bearing. Align the slotted attachment with
the bottom of the bearing, and tighten the slotted attachment to
expand the puller inside the bearing.
N OT I C E
Do not over tighten the slotted attachment. For more detailed
assembly and usage, see your bearing puller's manufacturer's
instructions.
Thread the rod of the bearing puller into the attachment. Grip the
slide hammer and forcefully pull away from the slotted attachment
to remove the bearing from the driver body.
7
17 mm Slide Hammer Bearing Puller
8
