13
Driver Body Bearing Installation
D r i v e r B o d y B e a r i n g I n s t a l l a t i o n
N OT I C E
To prevent damage when pressing the bearings into the driver body hub, make sure that the drift contacts both the inner and outer
bearing races.
Apply a thin layer of SRAM® Butter to the bearing bores.
Install a new 6803 bearing into the inboard side of the driver body.
Slide the Wheels Manufacturing 6803 adapter onto the threaded
rod of the Wheels Manufacturing Press-1 Sealed Bearing Press tool.
Insert the threaded rod of the bearing press through the inboard
side of the driver body. Slide the SRAM 6803 bearing press tool
onto the threaded rod.
Thread the bearing press handle onto the threaded rod.
Turn the threaded handle clockwise to press the bearing into the
outboard bearing bore until it is hand-tight.
Remove the bearing press tool.
N OT I C E
Do not overtighten the bearing.
1
SRAM® Butter
2
6803 Bearing
SRAM 6803 Bearing Press tool
3
