10
Driver Body Bearing Removal
D r i v e r B o d y B e a r i n g R e m o v a l
Use your fingers or a pick to carefully remove the pawls and leaf
springs.
Inspect the pawls and leaf springs for signs of damage or wear.
N OT I C E
If any of the pawls or leaf springs exhibit signs of damage or wear,
replace all of them. Otherwise, remove any grease on the pawls
and leaf springs with a clean rag.
Use a lint-free rag to clean the driver body and pawl slots.
Remove any grease on the driver body seal with a clean rag.
Inspect the driver body seal for signs of damage or wear.
If there are any signs of damage or wear, replace the driver body
seal.
Press the driver body seal, with the smooth side facing the driver
body, over the leaf spring and pawl carrier.
The driver body seal must be fully seated against the thin shoulder
of the driver body.
1
2
3
4
Pawl
Leaf
spring
