8
Rear Hub Bearing Removal
Insert the 17 mm Slide Hammer Bearing Puller slotted attachment
through the non-drive side bearing. Align the slotted attachment
with the bottom of the bearing, and tighten the slotted
attachment to expand the puller inside the bearing.
N OT I C E
Do not over tighten the slotted attachment.
Over tightening the bearing puller can damage the hub shell or
bearing.
For more detailed assembly and usage, see your bearing puller's
manufacturer's instructions.
Thread the rod of the bearing puller into the attachment. Grip the
slide hammer and forcefully pull away from the slotted attachment
to remove the bearing from the hub shell.
Remove the bearing from the slide hammer bearing puller.
5
17 mm Slide Hammer Bearing Puller
6
17 mm Slide Hammer Bearing Puller
