806834 v1.02 07.21 G5 Online install instructions and user guide
98
USER GUIDE
3.9 Energy saving
Sleep mode
Sleep mode
• Disabled (default).
• Enabled: Any attempt to dispense water will
bring the HydroTap out of sleep mode. Allow
sufficient time for the water to reach the set
temperature.
Sleep when
• It is recommended to recalibrate the light
sensor after selecting “sleep when it gets dark”.
• Ensure the ambient light is typical for operating
.
When sleeping
• Choose between the following modes:
• Keep hot water at 68°C, (chilled water kept at
setpoint for chilled models) (default mode).
• Turn system OFF, boiling and chilled water will
be OFF.
SLEEP WHEN
12:12 PM
It gets
dark
Not used
in 2 hours
[ ]
[ ]
Sleep when
When sleeping
Section 3 Command Centre Screen
Sleep mode