806834 v1.02 07.21 G5 Online install instructions and user guide
104
USER GUIDE
4.1 Filter maintenance
continued
Internal filter change
continued
Fit new filter.
Moisten connector o-rings.
Rotate
Push up
• Unpack replacement filter cartridge and remove
sanitary cap,
• Write today’s date where shown on the label.
• Avoid touching the filter o-rings and
filter opening as this may cause bacterial
contamination of the cartridge.
• Moisten the o-rings with water.
• Align the front cartridge label to the left, and
push the new cartridge up into the filter head.
• Turn the cartridge a quarter turn anticlockwise
until it comes to a complete stop and locks, with
the front label facing forward.
• Initiate the filter flush programme by scrolling
through the menu screen (see page
).
• When completed, clean up and dispose of old
cartridge and packaging.
• Close the door to secure the appliance.
• Adjust the filter settings (see page
) litres and
days.
• If the HydroTap G5 is switched off for a long
period of time (e.g. more than a weekend), run
water through the chilled water outlet for at least
60 seconds before consumption.
4.1.1 Internal filter change
continued
Section 4 User maintenance
