Page 16 of 20
HydroTap Installation and Operating Instructions
Normal Operation (not available on HT boiling only series)
Set Time
To change time, press either Mode
>
or Mode
>
button until Set Time is on
the display screen. Press
>
Adjust button to increase time or
>
Adjust button
to decrease time. Time increases or decrease in increments of one minute.
Hold the Adjust buttons down for rapid increases or decreases. The time will be
displayed in 24Hr mode.
Set Language
(option for EU models only)
EU models will have the default language set for German. To select English as
the default press the
>
Adjust button. To select German as the default Press
>
Adjust button.
Set Day
Press either Mode
>
or Mode
>
button until Set Day is displayed.
Press
>
Adjust or
>
Adjust to select day.
Filter Life
( Factory set at 6000 Ltrs )
Press either Mode
>
or Mode
>
button until Filter Life is displayed.
Press
>
Adjust button to increase Filter Life or
>
Adjust button to decrease
Filter Life.
Filter Life increases in 1000 Ltr increments to a maximum of 10000 Ltrs.
Reset Litres Filtered
This function is to reset the Filter Change display after a filter has reached the
end of its life (refer to “Replace Filter Instructions” section of this document).
Press either Mode
>
or Mode
>
button until “Litres Filtered” is displayed.
Press
>
Adjust once and “Reset Counter” will be displayed, press
>
Adjust
button once and “Are You Sure” will be displayed.
Press
>
Adjust once and “Litres Filtered” will be reset to 0.
Activating Sleep Mode
This mode allows the HydroTap to go into Energy Saving mode. In this mode
the unit will go to “sleep” after a predetermined period of inactivity. Press either
NOTE:
Operating the
Mixer tap will not
De-Activate the sleep
mode or the energy
saver On/Off timer
mode.
Setting the Energy Saver Timer
Mode Plus Button
Mode Minus Button
Plus Adjust Button
Minus Adjust Button
Note:
Mode buttons change the screen options
Adjust buttons select the screen options
