43
2. Following Table describes the SNMP configuration parameter
Label
Description
SNMP Read Community
This string is for SNMP Get-Request for
accessing the device.
SNMP Write Community
This string is for SNMP Set-Request for
accessing the device.
SNMP Trap Host
Setup the Trap host for sending the SNMP
event.
SNMP Trap Community
Setup the string for the trap community.
System Name
Type the Name which is the name of
device.
System Location
Type the Location which is location of
device
System Contact
Type the Name which is person or group
when the device has problem can find
they.
Trap Receiver IP Address Type the IP Address which is address of
SNMP Manager. There are three different
Trap Receiver IP Addresses allowed.
Addresss1 Community
String
This string allows receiving trap from the
device. There are three respective string
for setup.
3. SNMP Traps
Traps
Description
coldStart(0)
The trap from device after reboot the
device
linkDown(2)
The trap is sent when any of the links are
down. See the following table.
linkup(3)
The trap is sent when any of the links are
UP. See the following table.
authenticationFailure(4)
The trap is sent when the device receiving
gets or sets requirement with wrong
community.
4. Private MIBs
OID
Description
1.3.6.1.4.1.99.1 Mode,
Operation Mode in device.
1.3.6.1.4.1.99.2 SSID,
SSID of the device
