25
communication” and then press “PBC” option on the configuration tool
of the
WLAN Client (station)
. The client will get associated in a few
seconds.
Note
: If there isn’t any WPS setting such as Pin code and PBC in your WLAN
client tool, perhaps your WLAN client card doesn’t support WPS. You can try to
find the latest driver and tool to see if it supports WPS, or just don’t use WPS.
Site Survey
In the Site Survey page, you can scan the SSID in the neighborhood in all
modes including AP, Client, WDS, AP+WDS mode. You can see the usage of
the Wi-Fi Channel, and then you can setup a different channel for the device
accordingly to reduce the overlapping. Please refer to the basic setting section
to setup channel. Click “Refresh” to rescan it. In client mode, the Radio button
“Select” can be checked to connect. Check the one you want to connect and
then click “Connect” to connect.
Configuring as WLAN Client Adapter
This device can be configured as a wireless Ethernet adapter. In this mode,
the device can connect to the other wireless stations (Ad-Hoc network type)
or Access Point (Infrastructure network type) and you don’t need to install
any driver.
Quick start to configure
Step 1.
In “Basic Settings” page, change the Mode to “Client” mode. And
key in the SSID of the AP you want to connect then press “Apply
Changes” button to apply the change.
