38
Subnet Mask:
The number used to identify the IP subnet network,
indicating whether the IP address can be recognized
on the LAN or if it must be reached through a
gateway.
Server IP Address:
(Default Gateway)
The IP address of PPTP server.
User Name:
The account provided by your ISP
Password:
The password of your account
MTU Size:
Maximum Transmission Unit, 1412 is the default
setting, you may need to change the MTU for optimal
performance with your specific ISP.
Manually set DNS:
The IP addresses of DNS provided by your ISP.
DNS (
Domain Name Server) is used to map domain
names to IP addresses. DNS maintain central lists of
domain name/IP addresses and map the domain
names in your Internet requests to other servers on
the Internet until the specified web site is found.
Manual Setting
(MAC Clone):
Clone device MAC address to the specify MAC
address required by your ISP.
Ping from WAN:
Check to allow ping from WAN
Access webpage
from WAN:
Check to allow open the configuration page from
WAN.
Configuring DHCP Server
1. To use the DHCP server inside the device, please make sure there is no
other DHCP server already existing in the same network as the device.
2. Enable the DHCP Server option and assign the client range of IP
addresses as following page.
3.
When the DHCP server is enabled and also the device router mode is
enabled then the default gateway for all the DHCP client hosts will set to
the IP address of device.
DHCP Server
Check to enable DHCP Server
Assigned IP
Address
Input the beginning and the ending IP Address of the
DHCP range.
Assigned Gateway
Input the gateway of the Assigned IP Address.
DHCP IP Lease
Time
Input the lease time for assigned IP Address.
DHCP Static Map
Input the reserved IP Address for the certain DHCP
clients.
