manualshive.com logo in svg

Zinwell ZW-N5310, Руководство пользователя

Поделиться
Скачать
Zinwell ZW-N5310 Скачать руководство пользователя страница 19

 

18

Short Slot 

Default: enabled. Reduce the waits after the collision time before 
retransmitting. It will increase the throughput. 

Tx Burst 

Default: enabled. Enable it and the device will try this function when the 
other associated AP/Client is available.

 

Tx Short Preamble 

Default: enabled. Only requires disabling it when connecting some old 
802.11 b wireless clients.

 

Packet Aggregation 

Default: enabled. This is one of 802.11n technique to increase the data 
throughput.

 

 

802.11h Support 

Default: enabled. This function provides Dynamic Frequency Selection 
(DFS) and the transmit power control (TPC) to 802.11a MAC.

 

HT Operation Mode 

Default: Mixed (Mixed, Green Field).   

Mixed mode

: In this mode the device transmits the packets with 

preamble compatible legacy (802.11 a/g), so they can be decoded by 
legacy devices. The device receives and decodes both Mixed Mode 
packets and legacy packets. 

Green Field mode

: the device transmits HT packets without legacy 

compatible part. But the device receives and decodes both Green Field 
and legacy packets.

 

HT Guard Interval 

Default: 400ns. The 11n device inserts the Guard Interval into the signal. 
You can choose the interval between 400ns and 800ns. The available 
data rate modes are changed according to the Guard Interval. 

Guard 

Interval 

Bandwidth Available Data Rate Mode (Mbps) 

20MHz 

144.4/130/115.6/ 86.7/72.2/65/57.8/43.3/28.9/21.7/ 
14.4/7.2

 

400ns 

40MHz 

300/270/240/180/150/135/120/90/60/45/30/15

 

20MHz 

130/117/104/78/65/58/52/39/26/19.5/13/6.5 

800ns 

40MHz 

270/243/216/162/135/ 
121.5/108/81/54/40.5/27/13.5 

 

Содержание ZW-N5310

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды