Zinwell ZPlus-B191-OD, Руководство пользователя

Страница: 8 / 41

Power Over
Ethernet Kits
Grounding
Wire
2.5” /4” U
bolts and
Anchor
6 / 9 dBi
omni
directional
antenna
2.2 Hardware Installation
After you check all of your packages are ready, you can start installing your wireless
outdoor bridge. You can mount to a pipe or a side of a building. The steps showed in
following
：
1. You must mount the ZPlus-B191-OD into the bracket first.
Note: ALL the 4 screws had been tightly onto the Wireless Outdoor Bridge and
bracket
2. You can use the 2” inch or 4” inch U bolts to mount on the pipe.
The two U bolts must tightly mount and take care not to over-tighten
3. After check the ZPlus-B191-OD is mount well, you can connect two cables, Waterproof
RJ-45 network cable and RF cable, and the grounding wire.
The waterproof RF cable must tightly onto the Wireless Outdoor Bridge and another
side that link to the Antenna better to have the lightening protector
4. The waterproof RJ-45 cable also had been tightly onto the Wireless Outdoor Bridge and
another side that be plugged into PoE device.
8