Zinwell ZPlus-B191-OD Скачать руководство пользователя страница 2

Страница: 2 / 41

Notice

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions

：

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Warning

：

Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions

：

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

The user’s manual or instruction manual for an intentional or unintentional radiator shall caution

the user that changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE

：

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures

：

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

needed.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user‘s authority to operate the equipment.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter

Shielded interface cables must be used in order to comply with emission limits.

Содержание ZPlus-B191-OD










































Результаты поиска

Содержание ZPlus-B191-OD

Отзывы:

Похожие инструкции для ZPlus-B191-OD

Бренды по названию

Популярные бренды

Zinwell ZPlus-B191-OD, Руководство пользователя

Результаты поиска

Содержание ZPlus-B191-OD

Отзывы:

Похожие инструкции для ZPlus-B191-OD

Бренды по названию

Популярные бренды