Zimmer Z Wave Pro Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 44

Zimmer Z Wave Pro Скачать руководство пользователя страница 32

Safety and Maintenance

11.1 Safety

11

Page 23

The Z

Wave

Pro

is manufactured according to the DIN EN 60601-1 safety regulations.

Zimmer MedizinSysteme GmbH can only be held responsible for safety and reliability

of the device if



the device is operated using a proper power outlet with earth contact and the
electrical installation complies with DIN VDE 0100 part 710,



the device is operated in accordance with the operating instructions,



extentions, readjustments or modifications are only performed by persons
authorised by Zimmer MedizinSysteme GmbH,



the user has been instructed in the functional safety, proper operating condition, and

mechanical integrity of the device and handpiece prior to use,



the device is only operated by properly trained personnel,



the device is not operated in hazardous areas and/or a combustive atmosphere,



the device is disconnected immediately from the power supply upon the penetration
of liquid.

The device contains no parts that can be maintained or repaired by the operator.

Legal Notice:

For installation and operation of this equipment, national laws must be observed.

«
...
30
31
32
33
34
...
»

Содержание Z Wave Pro













































Отзывы:

Нет отзывов