Zimmer Z Wave Pro Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 44

Zimmer Z Wave Pro Скачать руководство пользователя страница 14

Set-up Device

Installation of Cables

5

Page 5

Note:

If the ZWave

Pro

is not mounted on the designated system trolley, please make sure

that it is standing on a stable surface. .

Note:

Make sure that the power switch of the device is set to “0”.

Connect the power

cable

Connect the power cable to the appropriate socket (13) in the device, and connect

the cable to the power supply.

Note:

The device may only be connected to power outlets with earthing contact.

Connect the handpiece

Connect the handpiece to one of the provided sockets channel I (15) or channel II

(16).

Note:

Make sure that an applicator head is inserted to the handpiece and that it is correctly
and completely screwed in.

Connect the foot

switch

Connect the footswitch to the appropriate socket (17) and place it on the floor.

Switch on the device

Turn on the device with the power switch (6).

Switch off the device

The device is switched off using the power switch (6).

To completely disconnect the device from the mains (all poles), unplug the power

cable.

Caution

!

All cables must be protected against clamping or other mechanical damage.

«
...
12
13
14
15
16
...
»

Содержание Z Wave Pro













































Отзывы:

Нет отзывов