7
CAUTION
Notes and handling regulations for electrostatically sensitive components
Electrostatically sensitive components are individual components, integrated circuits or assemblies that can be
damaged by electrostatic fields or electrostatic discharge.
►
When handling electrostatic components, make sure that persons, the work area and packaging are all fully
grounded.
►
Touch electronic components only in appropriately identified areas with conductive flooring and only if:
• You are grounded by means of special bracelets.
• You wear shoes that are suitable and approved for the discharge of electrostatic charges.
►
Do not bring electronic assemblies into contact with plastics and parts of clothing that have plastic content.
►
Store electronic assemblies on conductive underlays only.
►
Do not install electronic assemblies in the vicinity of data back-up devices or monitors (monitor distance >
100 mm).
►
Perform measurements on electronic assemblies only if:
• The measuring instrument is grounded (e.g. via a ground conductor).
• The measuring head is momentarily discharged before measuring with a floating measuring instrument.
WARNING
Risk of injury caused by suspended loads
Improper handling of suspended loads can cause serious injury.
►
Always keep an adequate safety distance from suspended loads.
►
Never walk underneath a suspended load.
INSTALLATION AND OPERATING INSTRUCTIONS:
LWR50L-21/LWR50L-22
DDOC01071 / b
EN / 2021-11-25
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
