Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: +49 7844 9138-0
●
Fax: +49 7844 9138-80
●
www.zimmer-group.de
DDOC00198/t
EN/2015-10-07
8
INSTALLATION AND OPERATING INSTRUCTIONS:
ELECTRIC GRIPPER GEP/GED5000 SERIES
8.3
Menu structure
Remaining operational life
Not assigned
"Position" teach area
"Gripper mode" menu
"Width" teach area
Force setting
Main menu
Remaining operational life
Based on 30 million cycles
Menu
Not assigned
Value
Teach - Offset 1 - 5
Value
Universal mode
NC, NO - operation
Value
Window width 1 - 5
Value
Force mode 1 - 5
Display
Error diagnosis
3 sec.
3 sec.
Changing the
value
Changing the
value
Changing the
value
Changing the
value
► Call up the main menu by pressing SET (3 seconds)
The menu display LEDs will flash
► You can access the edit mode of a value by pressing SET once again
Parameter display LEDs will flash
Only possible in menus that feature a selection point
► A value can be changed in a range from 1 to 5 using the arrow keys
► Pressing SET saves the value and goes back to the menu display
These LEDs will now flash
► You can scroll through the menu items using the arrow keys
► You can only leave the menu by pressing SET in the main menu
No LED will flash
8.4
Menu cycle course of action
INFORMATION:
Important for handling the product.
If no input occurs after 3 minutes, the menu is left without saving the values.
*) See "Glossary" section for definitions
