Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: +49 7844 9138-0
●
Fax: +49 7844 9138-80
●
www.zimmer-group.de
DDOC00198/t
EN/2015-10-07
18
INSTALLATION AND OPERATING INSTRUCTIONS:
ELECTRIC GRIPPER GEP/GED5000 SERIES
12. Declaration of Conformity
in the context of EC Directive 2014/30/EC on electromagnetic compatibility
Name and address of the manufacturer:
ZIMMER GmbH, Im Salmenkopf 5, D-77866 Rheinau, Germany, Phone: +49 7844 91380,
www.zimmer-group.de
We hereby declare that the products described below
Product designation:
Electric gripper
Type designation
: GEP5
���-/
GED5
���-
Series
conform to the requirements of the Electromagnetic Compatibility Directive 2014/30/EU in their design and the
version we put on the market.
The following harmonized standards have been used:
DIN EN ISO 12100:2011-03
Safety of machinery - General principles for design - Risk assessment and risk reduction
DIN EN 61000-6-3
EMC Generic standard, Emission standard for residential, commercial and light-industrial
environments
DIN EN 61000-6-2
EMC Generic standard, Immunity for industrial environments
DIN EN 61000-6-4
EMC Generic standard, Emission standard for industrial environments
A full list of applied standards can be obtained from the manufacturer.
Authorized representative for compiling the
relevant technical documents
Kurt Ross
See manufacturer's address
Rheinau, Germany, 2013-11-21 Martin Zimmer
First name, last name Address
(Place and date of issuance)
(Legally binding signature)
Managing Partner
11. Declaration of Incorporation
in the context of EU Machinery Directive 2006/42/EC (Annex II 1 B)
Name and address of the manufacturer:
ZIMMER GmbH, Im Salmenkopf 5, D-77866 Rheinau, Germany, Phone: +49 7844 91380,
www.zimmer-group.de
We hereby declare that the incomplete machines described below
Product designation:
Electric parallel gripper, electric three-jaw gripper
Type designation
: GEP5
���-/
GED5
���-
Series
conform to the requirements of the Machinery Directive, 2006/42/EC, Article 2g, Annex VII,b – Annex II,b, in their
design and the version we put on the market.
The following harmonized standards have been used:
• Basic health and safety requirements: No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.1, No. 1.3.2, No. 1.3.4, No. 1.3.7, No. 1.5.1,
No. 1.5.3, No. 1.5.4, No. 1.6.4, No. 1.7.1, No. 1.7.3.
•DIN EN ISO 12100:2011-03
Safety of machinery – General principles for design - Risk assessment and risk reduction
•DIN EN 60204-1
Safety of machinery – Electrical equipment of machines, part 1
•DIN EN ISO 13849-1
Safety function for superimposed hazards
•DIN EN ISO 13849-2
Safety related parts of control system
A full list of applied standards can be obtained from the manufacturer.
Commissioning of the incomplete machine is prohibited until it has been found that—where applicable—the
machine in which the above-mentioned incomplete machine is to be installed complies with the Machinery Directive
(2006/42/EC).
Authorized representative for compiling the
relevant technical documents
Kurt Ross
See manufacturer's address
Rheinau, Germany, 2013-11-21 Martin Zimmer
First name, last name Address
(Place and date of issuance)
(Legally binding signature)
Managing Partner
