Zimmer enPuls, Руководство по эксплуатации

Страница: 21 / 50

Treatment screen
4
19
Energy/ Bar graph
Shows the selected shock energy. When treatment is active the bar
graph is filled in.
Setting the shock energy can be done either before or during shock
delivery.
The shock energy can be set at the levels 60, 90, 120 or 185 mJ.
Save
After changing the parameters, based on individual needs, press the
button “Save” for saving the settings either in the Favourites list or the
Memory list
Count direction
Press to set the count direction (increasing or decreasing) of the number
of shocks set.
Number of shocks
Shows the pre-selected shock numbers as well as the current number of
shocks delivered to the patient.
Also the count direction (increasing in this case) is shown.
Pressing the “Number of shocks” field opens the Input window, defining
pre-selection.
Note:
Shock delivery without
pre-selecting the shock
number enPuls offers two options for shock delivery:
For shock delivery with no pre-selected number of shocks, the device
does not end the treatment. As long as the footswitch is activated,
shocks will be delivered.
For shock delivery with no pre-selected number of shocks, only the
upward count direction is active.