Zimmer enPuls, Руководство по эксплуатации

Страница: 16 / 50

Installation
2.1. Fitting the cables, starting the
system
2
14
Note:
Before starting up the system, remove enPuls from its transport case. Do
not operate the device while it is in the case.
Ensure that enPuls is placed on a stable surface.
Note:
Make sure that the main switch on the device is set to '0'.
Connecting the
mains cable
Connect the mains cable to the designated port (17) of the device and
then plug into the mains.
Connecting
the handpiece
Plug the handpiece into the appropriate socket (19) of the device and
place it on the table.
Note:
Ensure that an applicator head is inserted into the handpiece and that it
is properly screwed in as far as it will go.
Connecting
the footswitch
Plug the footswitch into the appropriate socket (18) of the device and
then place it on the floor.
Switching on the device
Switch on the device using the main switch (15).