SAFETY
Precautions for installation
Beware of electric shock!
Install grounding device according to application standard.
Do not touch live parts with naked skin, wet gloves or wet
clothes.
Be sure you are insulated from ground and workpiece.
Cover the cover plate of the machine before power on to
avoid an electric shock.
Confirm the safety of your working position.
Beware of fire hazard!
Please install the machine on
non-combustible material
s to
avoid a fire.
Make ensure there are no inflammables near the cutting
position to avoid a fire.
Beware of explosion!
Do not install the machine in an environment with explosive
gas to avoid an explosion.
Replacing the components can be dangerous.
Only professionals can replace the components of the machine.
Make sure there are no foreign bodies such as wire leads, screws, gaskets and metal bars
falling into the machine inside when replacing the components.
Make sure the connecting wires inside the machine are correctly connected after replacing
the PCBs, and then the machine can be run. Otherwise, there is a risk of damage to
property.
Carrying or moving the machine can be dangerous.
Cut the input power off via the switching box before moving the cutting machine.
The handle can only be used for moving the cutting machine by hand in short distance, and
it cannot be used for lifting. Otherwise, personal injury or property damage may be caused
by a drop.
Make sure that the flying rings are tightened, and that the machine enclosure and cover are
fixed when moving the cutting machine with a crane,
Two lifting belts should be used when lifting the cutting machine, and the angle formed by
the lifting belt and the vertical should be smaller than 15°.
