Figure 3-1: Front panel of I-PLAS60
No.
Part name
Function
1
Lifting ring
For lifting the machine.
2
Handle
For carrying the machine
3
Abnormity indicator
To indicate the machine is under overcurrent or overheating
protection status when it illuminates.
4
Digital meter
To display the cutting current.
5
Gas lack indicator
To indicate that the supply gas pressure is insufficient (
＜
0.3MPa)
6
Gas pressure meter
To display the current gas pressure during the machine is working.
7
Gas-check switch
To switch among plasma air checking, working gas checking and
cutting.
8
2T/4T switch
To switch between 2T and 4T cutting mode.
9
Gas pressure control knob
To adjust the gas pressure during the machine is working.
10
Current control knob
To adjust the cutting current value.
11
Interface for the cutting torch
To connect the cutting torch.
12
Pilot arc terminal
To connect the pilot arc wire lug of the cutting torch.
13
Quick socket
To connect the earth clamp.
14
2-pin aviation socket
To connect the 2-pin aviation plug of the cutting torch; to control
the start-up of the machine.
15
Swivel caster
To support the machine; for moving the machine.
