15 of 39
SW-41Plus 4x1 HDMI Switch User Manual
UM-002-0001-000-00 |
July 22, 2020
© 2020 Zigen Corporation
www.zigencorp.com
S
W
-4
1P
lu
s
U
se
r
M
a
n
ua
l
8
Using the IR Remote Control
The included IR remote control is used to switch between HDMI inputs. The front panel of the SW-41Plus
has a set of four LED indicators which are associated with each HDMI input on the switch.
1.
When the SW-41Plus is powered-on for the first time, Input 1 will automatically be selected.
2.
Point the IR remote control unit at the IR sensor on the front panel. If an IR extender is being
used, then both IR sensors will be used to receive IR signals.
3.
Each numbered button on the IR remote control unit represents an input. Press the desired
source button on the IR remote control to switch to that input.
Using the IR Remote Control